Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Gunsmithing & Repairs
Ruger KP95DC Problem
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Fr Mulcahy" data-source="post: 4374651" data-attributes="member: 42567"><p>Has anyone else encountered this problem?</p><p></p><p>I bought this back around 1999. I've put a lot of rounds through it. I took it to the range last Sunday and everything was fine for about 25 rounds. Then the brass started ejecting more slowly, and finally the slide wouldn't cycle--it was stone-cold shut and would not budge. I made sure that there was not a live round in it and then took it home.</p><p></p><p>I used my borescope to check the chamber and I saw the brass still in the chamber. I finally got the brass out tonight after figuring why the slide was stuck. The barrel isn't dropping as the slide goes back. If I push the barrel down then the slide goes back.</p><p></p><p>I think that the recoil springs need to be changed. But I would appreciate any helpful input.</p></blockquote><p></p>
[QUOTE="Fr Mulcahy, post: 4374651, member: 42567"] Has anyone else encountered this problem? I bought this back around 1999. I've put a lot of rounds through it. I took it to the range last Sunday and everything was fine for about 25 rounds. Then the brass started ejecting more slowly, and finally the slide wouldn't cycle--it was stone-cold shut and would not budge. I made sure that there was not a live round in it and then took it home. I used my borescope to check the chamber and I saw the brass still in the chamber. I finally got the brass out tonight after figuring why the slide was stuck. The barrel isn't dropping as the slide goes back. If I push the barrel down then the slide goes back. I think that the recoil springs need to be changed. But I would appreciate any helpful input. [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Gunsmithing & Repairs
Ruger KP95DC Problem
Search titles only
By:
Top
Bottom
