Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="austin.brown" data-source="post: 2186550" data-attributes="member: 4912">Well everyone was correct the mags were dirty.  The part of the follower that was directly beneath the nose of the bullet was caked with gunk on the two original mags.  I went ahead and disassembled and cleaned all 5 of my mags and they seemed to work a lot better.  I just thumbed the bullets out of the mags to see if the follower was dragging.Also, something I learned, the thumb stud MUST be on the left side of the mag as it goes in the pistol with the pistol pointed down range.  I got one on the wrong side and it did not function correctly.Thanks OSA brethren!!!</blockquote>