Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="ArmedCivy" data-source="post: 1698837">Gut check time for the SD9! I field stripped to clean today and i shot break free down into the trigger return spring...Apex suggests to shoot white lithium grease inside the spring, which inturn collects particulate from combustion...and i was unable to clear the spring of unspent powder with the greace inside of it. This resulted in a gritty trigger pull, so i pulled the trigger out, completely removed all the greace and particulate from the spring, regreaced, and reinstalled. It was a bit of a pain in the butt; however, going through all that trouble DID bring the smooth trigger back. I'll have to see if there is an easier way around this. The original spring had a piece of felt inside, maybe i can remove it from the original spring and throw it in the new one. MAYBE...Just wanted to keep those interested in this setup aware of what i'm seeing.</blockquote>