Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="montesa" data-source="post: 4385497" data-attributes="member: 477">Good deal. When the wheels are spinning away from you the knife will be near the top of the wheel depending on how acute you want your angle to be.  You will be looking straight down and with the right lighting you can see the burr form. Once you have a burr move down on the wheel a couple of degrees on the polishing wheel.   You'll have a knife that's about as sharp as possible. Don't try to change the angle by tilting the knife.  Just keep it horizontal and change where you touch on the wheel.  Also use very light pressure.</blockquote>