Sig Sauer to offer stand alone P320 Fire Control Units (FCU)

[Engineman1960]

According to this article, Sig Sauer will be offering a stand alone P320 Fire Control Unit;

The units are to start shipping to dealers in October.

The MSRP on the P320 FCU is not available at this time.

https://www.guns.com/news/2020/07/2...Ta4JV7D&sc_llid=72995&sc_eh=d5898fae974cb5891

 

[spazzwarr]

Don't know if this has been posted yet. The company below has Sig bare/stripped FCUs for sale on Gunbroker. Their web site has FCUs both built and stripped, parts and parts kits along with 80% Sig P series FCUs. Most is out of stock.

https://www.abprototype.com/

https://www.gunbroker.com/All/search?IncludeSellers=4416557

 

[OKNewshawk]

I wish someone would offer Sig P250 FCUs for sale. I know they're ancient news but I still like 'em.

 

[JD8]

Makes sense, guys have gone apechit modding these things.

 

[Engineman1960]

In 2018 -- I bought a P250 in .22lr from CDNN -- for little less than $290 ($289.74 with shipping).

According to this website you can buy the conversion kits (if you can find them).

https://www.thetruthaboutguns.com/new-from-sig-sauer-p250-22-22lr-pistol/

I tried switching the grip frame to an X frame -- the FCU trigger spring came off (have to put back together).

Trigger seems little heavy for me.

 

[spazzwarr]

A few years back I bought a P250C in .40 cal and one in .22 LR. Both FCUs were the same. I switched them between Grip Modules/frames and slides. all worked. I still have the .22LR. The grip module between the P320 and the P250 are the same. Have swiched those out and have pit the P320SC grip on the .22LR and it works fine. I have been looking for a conversion kit for 9mm for the past 3 years. They were out there but no longer.

 

[HiredHand]

I thought there was someone that was going to bring an 80% P320 FCU to market.

 

[Engineman1960]

Got the trigger spring in !!!!

I brought the P250 firearm up; I thought it might be a better bargain (value wise) to buy the .22lr and shop for the conversion parts separately -- as Spazzwarr noted the P250 9MM conversion parts are scarce to non-existence.

 

[Engineman1960]

I like the X-Grip Frames -- the tabs on the P250C-22lr magazine baseplate are like the tabs on the 1st generation P320 magazines.

The tabs are a bit bigger than the magazine well of the X-Grip Frame so the magazine will not seat.

You can modify the P250 magazine baseplate (I have cut the tabs off)to make them compatible for the X-Frame.

 

[Glock 40]

Is this Sigs way to make sure the guns don't fire by themselves? Is to only sell the FCG now. I mean no magazine and no barrel you can't have any 320 firing on their own that way.