Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="gerhard1" data-source="post: 2825784" data-attributes="member: 5391">Finally got the press mounted on the bench.  It was tough to do as I don't have a drill, but after a long hard battle it is on the bench.   I made a primer-catcher tray by cutting  a 1 inch section off the bottom of a plastic pop bottle, and since I raised the press up about an inch and a half off the bench using nuts for spacers, I can catch the spent primers in the improvised tray.  It seems to be pretty solid.Now all I have to do is install and adjust the dies and the powder measure, and I'll be in business. That should be fairly simple.I have a good, mild mid-range load I use for 38 Special and it is a real nice load to shoot.</blockquote>