Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="GWB137" data-source="post: 4357660" data-attributes="member: 31631"><p>Boiling water and a wrench, standard lefty loosey, may need to put it in a aluminum jaw vice to get it to come loose. AND MAKE SURE YOU RUN AN ALIGNMENT TOOL THROUGH IT AFTER YOU PUT THE CAN ON SO YOU DON'T GET A BAFFLE STRIKE. The front sight block is held on with that jam nut, there is no shoulder aligned with the bore so crooked suppressors are common on that kind of muzzle. Good luck <img class="smilie smilie--emoji" loading="lazy" alt="👍" title="👍" src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f44d.png" /></p></blockquote><p></p>