Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="mightymouse" data-source="post: 2975686" data-attributes="member: 15253"><p>Mine passed the loaded cartridge test, too, but did not function correctly until I replaced the extractor spring.  On an FEG, I would do it as a matter of course.  Remove the firing pin and spring.  Use a 3/32" pin punch to drive the sear lever roll pin out from right-to-left and lift sear lever out of slide.  Then use a 1/16" pin punch to drive the extractor roll pin out from bottom-to-top, taking care to control the extractor and its spring.</p></blockquote><p></p>