Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="steelfingers" data-source="post: 2996184" data-attributes="member: 38658">Another update on mod to Boyd stock. And another RED NECK FIXEMHated the plastic catch for the mag so I fixed it.Picked up two washers that combined were the same thickness of the Boyd plastic catch and same screw hole.Pic one is the old catch and the two washers I will be cutting down.  The lower washer will be shorter than the upper for the latch to enter and the upper will be the catch.Two is the beginning of the cut.  Three is the old catch on the cut washers and painted as a guide for grinding.Four is the cut down lower washer installed.  Five is the upper catch washer longer as it is the catch.  Five is the installed new metal catch with mag.  Six is a better look.Snug fit and you just can't beat RED NECK DIY....HA[ATTACH=full]102039[/ATTACH] [ATTACH=full]102039[/ATTACH][ATTACH=full]102040[/ATTACH] [ATTACH=full]102041[/ATTACH] [ATTACH=full]102042[/ATTACH] [ATTACH=full]102043[/ATTACH] [ATTACH=full]102044[/ATTACH] [ATTACH=full]102045[/ATTACH]</blockquote>