Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="g54b16psi" data-source="post: 4221766" data-attributes="member: 49052"><p>Wherever you go, ask to see their work first.  Pay particular attention to the gap at the top of the roll-up windows.  The tint can't go all the way up (or it will peel) but if they are worth their salt, it will be extremely tight to the top edge of the glass.  I consistently produce 1/32" to 1/24" at my shop in Denver.  Also, check around the vertical edges for light gaps and make sure the film goes well below the belt molding so the film doesn't peel when the window is rolled up and down.</p></blockquote><p></p>