Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
If you have bought, sold or gained information from our Classifieds, please donate to OKShooters Association and give back.
You can
become a Supporting Member
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
Classifieds
Want To Buy Ads
.243 Brass and Projectiles
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="swampratt" data-source="post: 3509121" data-attributes="member: 15054"><p>and 7MM-08 and .270 and the extractor groove in 30-06 is a bit narrower than the above cases but could also be done.</p><p></p><p>I have made .308 from all the above and even used 338 Federal cases. Annealing will be your friend here when pulling a .270 or 30-06 into a short case like a .243.</p><p>Neck turning may also need to be done.</p><p>Sears supply sometimes has projectiles.</p><p>I got some 2 weeks ago.</p><p></p><p>I had to neck turn my Lapua .243 cases for a .243 Mossberg I own as it has a very tight chamber.</p><p>My winchester .243 cases measure .243" ID after firing.</p><p>Lapua cases shot horribly in that rifle so I neck turned them and they shot excellent.</p><p></p><p>Horribly = 3MOA </p><p>Excellent = Sub MOA</p></blockquote><p></p>
[QUOTE="swampratt, post: 3509121, member: 15054"] and 7MM-08 and .270 and the extractor groove in 30-06 is a bit narrower than the above cases but could also be done. I have made .308 from all the above and even used 338 Federal cases. Annealing will be your friend here when pulling a .270 or 30-06 into a short case like a .243. Neck turning may also need to be done. Sears supply sometimes has projectiles. I got some 2 weeks ago. I had to neck turn my Lapua .243 cases for a .243 Mossberg I own as it has a very tight chamber. My winchester .243 cases measure .243" ID after firing. Lapua cases shot horribly in that rifle so I neck turned them and they shot excellent. Horribly = 3MOA Excellent = Sub MOA [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
Classifieds
Want To Buy Ads
.243 Brass and Projectiles
Search titles only
By:
Top
Bottom