Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="donner49" data-source="post: 2429082" data-attributes="member: 33178"><p>I drilled two of them, messed both up. the first was off by .080  and the second barrel went in, but pointed up. lol. costly mistake,  all the other holes came be drilled easy, but the barrel hole is a bear.  the two receiver holes that are to be tapped I drilled them to .700 with the .250 drill like the instruction said to do, only to find I pulled the threads out when tapped . I suppose I could put a bushing in place where the one hole is off and straighten that out. live and learn , I think I may give up on this as like you I have no mill and don't know anyone that can help, but the receiver sure looks good on the stock with new barrel.</p></blockquote><p></p>