Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Moparman485" data-source="post: 3904054" data-attributes="member: 38840">Keep in mind, I use 20% gel, so add “approximately” 30% penetration depth to the depth numbers to reflect 10% gel. Personally, I have used the 180HST load with great results on hogs and white tails. I use them in both my carbines and 10mm pistols. I created the 155barnes load solely because I was bored and I use it in my RIA 1911 and hi point 10mm carbine with great results. Obviously, use the above load data at your own risk,but they are safe in every 10mm I have ever fired them through, but they are stout loads.</blockquote>