Reply to Thread

Message

<blockquote data-quote="Sanjuro82" data-source="post: 1614185" data-attributes="member: 14058">OK I&#039;m back from Range Trip #3!&nbsp; I must say the DB9 is really starting to come into it&#039;s own.&nbsp; This was the best session with the DB9 for me by a long shot.&nbsp; This was also my first trip to the range after polishing my feed ramp and barrel chamber&#039;/throat.&nbsp; I feel that the polish did increase the reliability with feeding.&nbsp; My accuracy also improved.&nbsp; I&#039;m now comfortable with holding high, and I&#039;ve much improved on my trigger pull.&nbsp; I can actually stage the trigger now, which reduces the chance of jerking the pistol while firing.&nbsp;&nbsp; Here&#039;s the ammo type and that I fired during this range trip.50 rounds of CCI Blazer Brass 9mm Luger 115 gr FMJ1 FTF (double feed)50 rounds of Federal Premium 9mm 115 gr JHP1 FTF25 rounds PMC Bronze 9mm 115 gr FMJFlawless!20 rounds Glaser Pow&#039;R Ball 9mm Luger +P 100 gFlawless!20 rounds Hornady Critical Defense Ammunition 9mm Luger 115 Grain FTXFlawless!I really liked the way that the Pow&#039;R Ball fired, very accurate.&nbsp; But I wonder what the expansion would be like?&nbsp; I shot only at paper targets.&nbsp; The Hornady Critical Defense ran perfect once again.&nbsp; I feel confidant with the Critical Defense and the Pow&#039;R Ball as my carry loads.&nbsp; The cheap range ammo that I fired also ran a lot smoother than my previous two trips.&nbsp; Again, the polishing seems to have help.&nbsp; Also my mag springs are finally breaking in.&nbsp; Much easier to load now.&nbsp; After I clean her up tonight, I&#039;m going to do a through inspection of the pistol to make sure everything is good to go (ie: no cracks or unusual wearing).&nbsp; I will post pictures.&nbsp;&nbsp; Oh and my current round count stands at 409 through her and my assembly pins are still holding strong.&nbsp; Guess I&#039;m one of the lucky ones, as I know a lot of folks have mentioned this problem!</blockquote>

[QUOTE="Sanjuro82, post: 1614185, member: 14058"] OK I'm back from Range Trip #3! I must say the DB9 is really starting to come into it's own. This was the best session with the DB9 for me by a long shot. This was also my first trip to the range after polishing my feed ramp and barrel chamber'/throat. I feel that the polish did increase the reliability with feeding. My accuracy also improved. I'm now comfortable with holding high, and I've much improved on my trigger pull. I can actually stage the trigger now, which reduces the chance of jerking the pistol while firing. Here's the ammo type and that I fired during this range trip. 50 rounds of CCI Blazer Brass 9mm Luger 115 gr FMJ 1 FTF (double feed) 50 rounds of Federal Premium 9mm 115 gr JHP 1 FTF 25 rounds PMC Bronze 9mm 115 gr FMJ Flawless! 20 rounds Glaser Pow'R Ball 9mm Luger +P 100 g Flawless! 20 rounds Hornady Critical Defense Ammunition 9mm Luger 115 Grain FTX Flawless! I really liked the way that the Pow'R Ball fired, very accurate. But I wonder what the expansion would be like? I shot only at paper targets. The Hornady Critical Defense ran perfect once again. I feel confidant with the Critical Defense and the Pow'R Ball as my carry loads. The cheap range ammo that I fired also ran a lot smoother than my previous two trips. Again, the polishing seems to have help. Also my mag springs are finally breaking in. Much easier to load now. After I clean her up tonight, I'm going to do a through inspection of the pistol to make sure everything is good to go (ie: no cracks or unusual wearing). I will post pictures. Oh and my current round count stands at 409 through her and my assembly pins are still holding strong. Guess I'm one of the lucky ones, as I know a lot of folks have mentioned this problem! [/QUOTE]

Verification