Reply to Thread

Message

<blockquote data-quote="Donald" data-source="post: 1392685" data-attributes="member: 5934">Just to ad a bit.&nbsp; All chambers vary a bit.&nbsp; Factory brass or rounds are made to fit the smallest chamber.&nbsp; A big goodie for you on using Lapua brass, none better.&nbsp; And treated right they will last for at least 25 reloadings.&nbsp; Maybe need annealing now and then.&nbsp; If this is a gas gun, then you need to full lenght resize each time.&nbsp; Getting a proper die is a problem.&nbsp; If you will take 3 of your 3 times fired cases, unsized and send them to Harrells&nbsp; <a href="http://www.harrellsprec.com/" target="_blank">http://www.harrellsprec.com/</a>&nbsp; They will make you a full length sizing die custom made for your chamber.&nbsp; Cost is $70 and will be the best $70 you ever spent.&nbsp; About ever 5 or 6 reloads you need to anneal the neck and shoulder.&nbsp; A site with a lot of info.&nbsp; <a href="http://www.6mmbr.com/annealing.html" target="_blank">http://www.6mmbr.com/annealing.html</a>.&nbsp; Lots to learn about reloading properly.&nbsp; Enjoy the journey.Donald</blockquote>

[QUOTE="Donald, post: 1392685, member: 5934"] Just to ad a bit. All chambers vary a bit. Factory brass or rounds are made to fit the smallest chamber. A big goodie for you on using Lapua brass, none better. And treated right they will last for at least 25 reloadings. Maybe need annealing now and then. If this is a gas gun, then you need to full lenght resize each time. Getting a proper die is a problem. If you will take 3 of your 3 times fired cases, unsized and send them to Harrells [url]http://www.harrellsprec.com/[/url] They will make you a full length sizing die custom made for your chamber. Cost is $70 and will be the best $70 you ever spent. About ever 5 or 6 reloads you need to anneal the neck and shoulder. A site with a lot of info. [url]http://www.6mmbr.com/annealing.html[/url]. Lots to learn about reloading properly. Enjoy the journey. Donald [/QUOTE]

Verification