I purchased and automated a Magma Master Caster bullet molding machine. Making well over 500 bullets an hour and now have 11 molds. I am going to build a self-feeding bullet sizer using Lee push thru sizing dies. have much of the material. need something for the ram and thinking a reloading press ram that will accept the shell holder end punch of the Lee sizing kit would be a good starting point. looking for something on the bigger size. anyone have a ram or press that they are not using. In the Tulsa area. I do have a buddy with a lathe. it I don't find a press ram, will probably machine a nut to hold the punch at the end of the shaft. not quick change but would have good centering.
