Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="NikatKimber" data-source="post: 1300497" data-attributes="member: 423">Unique can be used in all of those. I load it for .357 Mag to good effect. Ask Dustin what he thought of my .357 loads. Not as hot as they can get, but still plenty stout. And they do good out of my shorter barrels. I think H110 is at it's best in the longer barrels for maximum results.I use Bullseye in 9mm, .38, and .45. I understand it can be used in light magnum loads too. The one caution with Bullseye, is it takes incredibly small amounts of powder, so it would be easy to double charge a case with and never notice until the KaBoom!!. IE, I load 2.8gr Bullseye under 158gr swc bullets for .38. At that charge, I could easily triple charge the case, if not more without overflowing. Great powder, be extremely cautious using it. I started with it, not knowing what I was doing, and never had a problem. So it can be done.Titegroup can be used in a lot, but I don't know about the magnum loads.</blockquote>