Got bored today and polished out my LCP barrel. Turned out good.
I used a Dremel polish kit and a bench grinder with a buffer wheel. I started out using the Dremel with a semi-coarse sanding wheel, then went to the fine sanding wheel. After I sanded it out I used a Dremel polish wheel with the supplied Dremel polish compound. (I don't recommend using this inside the house because crap flies everywhere.) After that I used a bench buffer with an ultra-fine automotive buffing compound. I buffed it out about five times with the bench buffer.Tell us about it. Tools, etc
Enter your email address to join: