Want To Buy S&W 2213/2214 8rd magazine

[scott024]

Looking for at least one 8 round magazine for a Smith & Wesson 2213/2214.

Norman area or I can pay you to ship it.

Thanks.

 

[Shoot Summ]

Looking for at least one 8 round magazine for a Smith & Wesson 2213/2214.

Norman area or I can pay you to ship it.

Thanks.

Those mags command a premium, folks ask over $100 for them online. You can use the 10 and 12 round mags from the 422/622/2206. They stick out a bit, someone shared a 3d print file with me, I've printed several of the sleeves to make up the gap, they are pretty slick. If you go the longer mag route I will send you a sleeve if you cover shipping.

I have a ton of 2214 mags, I might sell one if you really have to have one, I couldn't go cheap, but I could do better than the $100 ask from sellers online.

 

[scott024]

I've read that the 10 rounders work, just haven't tried it yet. I have a couple 422's and and a 622. I've got several 10 and a couple 12 round mags. The 2213 I picked up has one mag. I was just wanting to get a backup. I missed one on ebay for about 40 bucks. If nothing else, it'll give me something to look for at the next tulsa gun show. Grip extension looks good. PM your info and I'll venmo/paypall you funds for one.

 

[Shoot Summ]

I've read that the 10 rounders work, just haven't tried it yet. I have a couple 422's and and a 622. I've got several 10 and a couple 12 round mags. The 2213 I picked up has one mag. I was just wanting to get a backup. I missed one on ebay for about 40 bucks. If nothing else, it'll give me something to look for at the next tulsa gun show. Grip extension looks good. PM your info and I'll venmo/paypall you funds for one.

Ebay is the best place to watch, I used to pick them up super cheap as well as the 12 round mags too. I honestly don't use the 8 round mags anymore, too much fun to run 12 rounds through them at a time.

 

[bambihunter]

I've got that whole series (422, 622, 622VR, 2206, 2213, 2214 and even most model 41's) will all take the orange 12 round mags. I stocked up big time on mags and especially followers after the AWB expired in 2004. It seems its only the followers that crack that ever cause any issues on these. That said, I have found some of the 10 rounders that several of them didn't like. They weren't the welded-on base that were made from 94-96 but rather the earlier model 41 ones that had a slightly different geometry in the feeding area. It is a little hard to spot the difference.
I have misplaced it, but somewhere I have a jig to drill out and convert those 10 round 94-96 AWB era mags into 12 round removable base versions. I made the jig and tested it while they were still readily available thinking there may become a day where the need may arise. But, then went back to collecting 12 round ones.

I never have understood why these didn't make it. They are great guns and great suppressor hosts with their low bore axis.

 

[Gill]

Those mags command a premium, folks ask over $100 for them online. You can use the 10 and 12 round mags from the 422/622/2206. They stick out a bit, someone shared a 3d print file with me, I've printed several of the sleeves to make up the gap, they are pretty slick. If you go the longer mag route I will send you a sleeve if you cover shipping.

I have a ton of 2214 mags, I might sell one if you really have to have one, I couldn't go cheap, but I could do better than the $100 ask from sellers online.

View attachment 398352

Can I buy a few sleeves from you?

 

[bigbadge]

Those mags command a premium, folks ask over $100 for them online. You can use the 10 and 12 round mags from the 422/622/2206. They stick out a bit, someone shared a 3d print file with me, I've printed several of the sleeves to make up the gap, they are pretty slick. If you go the longer mag route I will send you a sleeve if you cover shipping.

I have a ton of 2214 mags, I might sell one if you really have to have one, I couldn't go cheap, but I could do better than the $100 ask from sellers online.

View attachment 398352

I would be interested in acouple of skeeves.

 

[Shoot Summ]

Can I buy a few sleeves from you?

I would be interested in acouple of skeeves.

Guys, I don't feel right selling them as someone else did the design work. I have some that I printed that I am not 100% happy with the quality, if you want them I will give them to you. If you want them shipped I would ask you cover the shipping.

 

[Gill]

I could cover shipping. Do I PM you my address and I get yours and just order a shipping label on USPS, UPS, FEDEX or DHL and send it to you through email?

 

[bigbadge]

I would still love to have one and would be happy to cover any cost Hou feel is needed.

Thanks!