Sears M200 20 gage Shotgun Barrel Part Number

[Radicalman64]

I have a Sears M200 20 gage shotgun that does not have a barrel. How can I find out what the barrel part number is?

 

[dlbleak]

That’s probably going to be a Mossberg or Springfield. That should broaden your search. There is some cross reference pages on the interwebz. Should be easy to find.
Also, Numrich should have some info.

 

[dlbleak]

Oops, take that back. Looks like a Winchester 1200. Should be easy to track down. I had a 1200 barrel I sold on here years ago but it was a 12g

The TED WILLIAMS MODEL 200 or the sears model 200.

The Ted Williams model 200 shotgun is essentially an alternate Winchester 1200. It was produced by Winchester to be sold in Sears, Roebuck and Company stores as their store-brand pump shotgun. The 200 bearing Ted Williams's name will usually look very similar to the shotgun in the ad. Sears also...

www.searsguns.com

 

[Catt57]

I make no guarantees, but it appears it was made by Winchester and model 1200 & 1300 barrels will fit your Sears 200.


Edit: dlbleak beat me to it.

 

[Catt57]

You might also research if it is worth it. I see a lot of reports that the plastic magazine throats are that designs weakness.

 

[dlbleak]

You might also research if it is worth it. I see a lot of reports that the plastic magazine throats are that designs weakness.

That is true. It makes it very hard to work the action. Really bad cases need to be slammed on the ground while holding the forearm.
A barrel shouldn’t cost to much and at least it would be a complete gun.

 

[Radicalman64]

Thanks everyone for your for sharing your knowledge!

 

[easy]

What is the Sears number? Makes a big difference - https://www.gunpartscorp.com/brand-cross-reference

 

[OK Corgi Rancher]

You can frequently find Mossberg Maverick 88 shotguns under $200. Probably a better choice than trying to track down a barrel...unless the Sears gun has sentimental value.