Want To Buy Single Tap and Die

[Fyrtwuck]

I’m looking for a single Tap and Die, thread size 7/8-14. This should be the same size as a standard reloading die.

The only thing I’ve found so far is in a full set of taps and dies which I don’t need and expensive.

 

[dlbleak]

Do you just need to clean up some threads on a press or something more specific?
Let me look around

 

[Mad Professor]

I’m looking for a single Tap and Die, thread size 7/8-14. This should be the same size as a standard reloading die.

The only thing I’ve found so far is in a full set of taps and dies which I don’t need and expensive.

Amazon if you don’t find something else.


ASZLBYM 7/8-14 HSS Tap And Die Set， UNF Machine Thread Tap And UNF Round Thread Die Right Hand https://www.amazon.com/dp/B071GN4RVJ/ref=cm_sw_r_cp_api_glt_fabc_XVRXD2MTJV38ZGJ49MXX

 

[dlbleak]

I don’t have one that big,sorry

 

[HoLeChit]

let me look and see what I have floating around. I know I have stuff up to about an inch and a half, just don't know what thread pitch. Do you need a specific style? Bottom tap? tapered? pointed?

 

[swampratt]

You are building something aren't you.

You know Home depot can order stuff in for you..they even order in car parts.
look here.
https://www.homedepot.com/p/Drill-America-7-8-in-14-Carbon-Steel-Hand-Tap-Set-DWTS7-8-14/305700705

I have not searched for a die yet.

 

[swampratt]

Here it is
https://www.homedepot.com/p/Gyros-7...Steel-Hex-Rethreading-Dies-92-95614/204626107

 

[Fyrtwuck]

let me look and see what I have floating around. I know I have stuff up to about an inch and a half, just don't know what thread pitch. Do you need a specific style? Bottom tap? tapered? pointed?

I’m not sure. The same threads that reloading dies have. I’ve been working on a project to put a camera on my Dillon 650. If I put the camera directly above the shell plate in the station after the powder drop I could see the powder in the case before it moves to the next station.

I have a piece of hard plastic similar to that of a cutting board I’d like to shape, thread and drill a hole through to feed the camera lead.

 

[tyromeo55]

Skip buying a die and go the full Monty with a lathe. I promise you’ll be much happier in the long run

 

[Fyrtwuck]

Lathe? Is that one of them things that spins fast, grabs you and splatters your blood all over the walls?

That’s probably what would happen if I had one.