-
If you have bought, sold or gained information from our Classifieds, please donate to OKShooters Association and give back.
You can become a Supporting Member
I have to add this to your add.
That table in front of the disc sander----- If you rotate that table so the grooves are pointing at the disc sander you can put tape in the deep middle groove to eliminate the sharp edges.
THEN lay your hacksaw cut rifle/shotgun barrel in that groove and spin it by hand against the spinning disc sander.
Perfectly flat crown.
Then chamfer the hole in the barrel with a marble and baking soda.
For 20 bucks that process alone is well worth it.
Heck for 60 bucks it would be worth it.
Yes that is what I do to my cut barrels.
That table in front of the disc sander----- If you rotate that table so the grooves are pointing at the disc sander you can put tape in the deep middle groove to eliminate the sharp edges.
THEN lay your hacksaw cut rifle/shotgun barrel in that groove and spin it by hand against the spinning disc sander.
Perfectly flat crown.
Then chamfer the hole in the barrel with a marble and baking soda.
For 20 bucks that process alone is well worth it.
Heck for 60 bucks it would be worth it.
Yes that is what I do to my cut barrels.
Message sent.
Similar threads
North East OK
- For Sale
- Sale Price: 150$
