Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Rifle & Shotgun Discussion
Winchester 1300 Defender issue
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="tul9033" data-source="post: 1347744" data-attributes="member: 2319"><p>Well I have to give credit where credit is due and it looks like EZB got this one. Apparently what was happening was when the gun was uncocked, like after the last shell had been fired and you pulled the trigger on an empty chamber. I'd have the butt on my hip to reload, the pump/bolt would slide back just a bit, maybe 1/2 an inch. Enough to keep the shell gate from pushing all the way down to allow the shell to enter the tube. Once I pulled the pump forward it would load up no problem. Thanks for the tip.</p><p></p><p>I had called Winchester today and was told to send it in. However, I thought I'd go through it one more time and sure enough the bolt was slightly open.</p><p></p><p>It holds 7 in the tube and 1 in the pipe for 8, plus 6 on the side saddle makes for 14 rds of 00 buck fury. With a tac light it makes for a nice little HD gun.</p></blockquote><p></p>
[QUOTE="tul9033, post: 1347744, member: 2319"] Well I have to give credit where credit is due and it looks like EZB got this one. Apparently what was happening was when the gun was uncocked, like after the last shell had been fired and you pulled the trigger on an empty chamber. I'd have the butt on my hip to reload, the pump/bolt would slide back just a bit, maybe 1/2 an inch. Enough to keep the shell gate from pushing all the way down to allow the shell to enter the tube. Once I pulled the pump forward it would load up no problem. Thanks for the tip. I had called Winchester today and was told to send it in. However, I thought I'd go through it one more time and sure enough the bolt was slightly open. It holds 7 in the tube and 1 in the pipe for 8, plus 6 on the side saddle makes for 14 rds of 00 buck fury. With a tac light it makes for a nice little HD gun. [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Rifle & Shotgun Discussion
Winchester 1300 Defender issue
Search titles only
By:
Top
Bottom