Does anyone on here have one they would loan or rent out. I can probably make one in a couple hours on a mill but figured I would ask first. I have two frames that have standard grip safetys on them and I want to put SPI beaver tails on. It appears that the SPI safeties use the .250 R versus the wilson combat compound radius. I will pay UPS shipping both ways.
Also if anyone has done this and you have input or tips. Please shout out. I have two of these I built with cheap internal parts kits form Sarco. I am now going back and putting Cylinder and Slide 4.5 lbs trigger pull kits, C&S long triggers. SPI grip safeties. I have not decided on the thumb safety yet but they will be extended. Once all this gets done I am going to attempt to fit some new barrel bushings. I think I will also put flat mainspring housing on. The arched ones do not feel correct.
Thanks
Johnny
Also if anyone has done this and you have input or tips. Please shout out. I have two of these I built with cheap internal parts kits form Sarco. I am now going back and putting Cylinder and Slide 4.5 lbs trigger pull kits, C&S long triggers. SPI grip safeties. I have not decided on the thumb safety yet but they will be extended. Once all this gets done I am going to attempt to fit some new barrel bushings. I think I will also put flat mainspring housing on. The arched ones do not feel correct.
Thanks
Johnny
