A few handmade knives I finished up this weekend.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

randallss7

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Aug 14, 2012
Messages
574
Reaction score
175
Location
Noble
Finished up a couple more 1st I really like, 2nd is ok it's different but fits well in hand.

1st knife?

3/16" thick 154cm blade is treated to 60rc with a cryo treatment,
over all length worked out to 7 7/8" some how...lol
blade length is 3 1/4
handle Buffalo horn with brass bolster and a three 1/4 inch pin pattern, tow Mosaic and one Mosaic lanyard tube


i1248.photobucket.com_albums_hh487_randallss7_DSCN0662.jpg

i1248.photobucket.com_albums_hh487_randallss7_DSCN0669.jpg

i1248.photobucket.com_albums_hh487_randallss7_DSCN0675.jpg

i1248.photobucket.com_albums_hh487_randallss7_DSCN0676.jpg


2nd one

2nd knife this one is questionable handle looks goofy but it feels really good in hand
blade is 1/8" CPMS-30v cooked to a ridiculous 61rc with cryo treatment..., this thing just slides across my natural stones, I though for a while I was going to have to use my diamond stones.
8" over all length
blade 3 1/2'
handle buffalo horn and one little 1/8" brass pin and thin guard

i1248.photobucket.com_albums_hh487_randallss7_DSCN0643.jpg

i1248.photobucket.com_albums_hh487_randallss7_DSCN0650.jpg

i1248.photobucket.com_albums_hh487_randallss7_DSCN0654.jpg
 

randallss7

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Aug 14, 2012
Messages
574
Reaction score
175
Location
Noble
Finished up a nice little Alabama Damascus hunter tonight

8" overall length
3 1/2 blade
Stabilezed emerald green California Buckeye
nickel silver guard stacked with green and nickel silver spacers, 9 1/16" nickel pins and matching Mosaic pin and lanyard tube.

i1248.photobucket.com_albums_hh487_randallss7_DSCN0698.jpg
i1248.photobucket.com_albums_hh487_randallss7_DSCN0696.jpg
i1248.photobucket.com_albums_hh487_randallss7_DSCN0685.jpg
i1248.photobucket.com_albums_hh487_randallss7_DSCN0689.jpg
i1248.photobucket.com_albums_hh487_randallss7_DSCN0690.jpg
 

Seadog

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Sep 22, 2009
Messages
5,664
Reaction score
6,971
Location
Boondocks
DUDE!!!! You make some NICE steel!!!!!! You are a talented and artistic with your work. I like were you are going with this!!!!! Hats off!!!!
 

randallss7

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Aug 14, 2012
Messages
574
Reaction score
175
Location
Noble
OK I put the final touched on this knife tonight, this is how most/all knives leave me and go to new owner, I made a handmade sheath out of leather, kydex if knife needs that type of sheath, add the lanyard made from leather and some sort of bead or paracord depending on knife, and then the most important part, hand hone the blade on natural Arkansas stones and strop it with a leather strop and green compound. This knife is very sharp and has a blade hardness of 60rc and has a cryo treatment it should gut and skin 2 to 3 deer before it needs much attention. I actually hate to let this one go I really want it for myself.

View attachment 1359497View attachment 1359497
i1248.photobucket.com_albums_hh487_randallss7_DSCN0705.jpg
i1248.photobucket.com_albums_hh487_randallss7_DSCN0708.jpg
i1248.photobucket.com_albums_hh487_randallss7_DSCN0710.jpg
i1248.photobucket.com_albums_hh487_randallss7_DSCN0711.jpg
 

Latest posts

Top Bottom