Glock 43 Magazine

[2 Timothy 4:7-8]

Glock 43 Magazine. When full, will not allow my slide to rack. I tried to disassemble it to look into it but I could not get it apart which explains the deep scratch on the bottom. Idk.. Maybe someone on here could use it or fix it. I will ship it via USPS for free.

 

[conditionzero]

Glock magazines have a detent on each side of the plate. To remove it you need to squeeze the magazine body together near the plate... If you wanted to open it up.

 

[2 Timothy 4:7-8]

Glock magazines have a detent on each side of the plate. To remove it you need to squeeze the magazine body together near the plate... If you wanted

I already bought a new one

 

[1911master]

Is the 43 new and are you trying to operate the slide with a full magazine with the slide forward?

 

[2 Timothy 4:7-8]

Is the 43 new and are you trying to operate the slide with a full magazine with the slide forward?

It has about 300 rounds thru it. This is the only magazine out of 3 that gives me this problem.

 

[1911master]

To be honest this wouldn't be a deal breaker for me. I load from a locked back slide and then top off the magazine. As along as the pistol functions with the mag in question I would keep on using it. JMO.

 

[2 Timothy 4:7-8]

To be honest this wouldn't be a deal breaker for me. I load from a locked back slide and then top off the magazine. As along as the pistol functions with the mag in question I would keep on using it. JMO.

I can't rack the slide with a full mag. It will not work. Releasing slide from locked and then topping off the magazine puts me back to square 1. The slide will not function with a full mag.

 

[okiebertt]

I will take the mag.

 

[Fyrtwuck]

I also have a 43. I can check it out for you and try to find the problem. It could be something simple.

 

[okiebertt]

No communication from Timothy, what happened with this?