The strip mall behind Raising Canes on Garth Brooks. I believe where the old Chinese Buffett was located.Do you know where it is going to be?
The strip mall behind Raising Canes on Garth Brooks. I believe where the old Chinese Buffett was located.Do you know where it is going to be?
Consider this HF assortment of 10mm sockets: https://www.harborfreight.com/search?q=10 mm essential socket setThe thing that sucks about Harbor Freight is you can’t just buy one 10 mm socket or one 10 mm wrench. You gotta go to Lowe’s or Home Depot, etc to buy those.
This is what I use to pull fence post. The shop hoist from HF was modified for the job.HF saved our bacon today.
We tried to remove a privacy fence that had 3-4’ of concrete on the posts.
Front loader on tractor was a no go. 7500 lb high lift jack was a no go, so went to HF to get a 6” gas powered auger.
Finished by removing dirt from three sides before pulling out with the tractor.
A potential two day job went to 4 hours for a $210 purchase. Work smarter, not harder is my motto. View attachment 475400View attachment 475401View attachment 475402View attachment 475403
Good idea but that aint pullin those post with 4 ft concrete.This is what I use to pull fence post. The shop hoist from HF was modified for the job.View attachment 475433
I have one of these augers and cowcatcher has seen it work. I did have to take out the exhaust screen when it started running sluggish.HF saved our bacon today.
We tried to remove a privacy fence that had 3-4’ of concrete on the posts.
Front loader on tractor was a no go. 7500 lb high lift jack was a no go, so went to HF to get a 6” gas powered auger.
Finished by removing dirt from three sides before pulling out with the tractor.
A potential two day job went to 4 hours for a $210 purchase. Work smarter, not harder is my motto. View attachment 475400View attachment 475401View attachment 475402View attachment 475403
Dadgumit, I nearly drove on by that one.I have some vintage hf tools from the late 1970 era. From when they would set up in a parking lot and sell tools. Most stuff back then that wasn't hf was made by the J.A. Pan company. Are mine collectors items now?
Enter your email address to join: