How do I get the slide off of this thing? My buddy has one and after some range time he went to clean it and we can't get the slide off of this pistol.. Any suggestions?
Thanks The Lockoutmonkey.
Thanks The Lockoutmonkey.
http://www.wonderhowto.com/how-to-disassemble-hi-point-.380-pistol/
I believe there is a pin in there somewhere you have to drive out first.
I believe there is a pin in there somewhere you have to drive out first.
My .380 Bersa has a little pin you recess and then the slide pops forward, then out. I'm sure it would be the same type of manuever.
btw..look on You Tube for your gun, you'd be surprised at how many ppl give mini lessons on particular type of guns.
btw..look on You Tube for your gun, you'd be surprised at how many ppl give mini lessons on particular type of guns.
the pin i in the back when you pull the slide all the back you can see it whee the safety is supposed to go on the slide. if that makes any sense
- Joined
- Jul 26, 2007
- Messages
- 1,411
- Reaction score
- 1
http://www.hipointtalk.com/viewtopic.php?f=4&t=449
One pin to punch out and the slide comes off. Cant get much simpler than that.
One pin to punch out and the slide comes off. Cant get much simpler than that.
Running over it with a bulldozer should get it off there. But why do you want to ruin a perfectly good boat anchor...
There you go, talkin' nasty 'bout the lightest recoiling, pack howitzer-sized .380 on the market.
The hipoint website gives all the info. we needed.
Thanks guys.
Thanks guys.
Similar threads
Latest posts
-
-
-
-
-
-
-
-
-
-
South East OK Colt Branded 1911 Holster & Magazine Carrier- Latest: CharlieWH2O
-
-
-
-
-
People are delinquent on almost everything they owe money on
- Latest: T. MIKE SMITH
-
