Yes just yesterday I went and shot it.Hey @swampratt. Have you played with the Swede any more?
I did have to remove some of the metal off the muzzle to get a round crown and not a square one.
There is a section of barrel that protrudes past the threaded portion.
I had to remove the majority of that and finally got a round exit. Not into the threads mind you.
I shot the same brass but I hand cleaned it and annealed it and did not trim it but I did FLS the brass and chamfer the mouth.
I then loaded it with 4 different loads and one that shot best was the 140 gr. A-max with H4350
1.8" at 100 yards for 3 shots with the iron sights.
It looks to have potential.
That load shot pretty low of maybe my hold was just low.
Those iron sights are fat.
The bottom 3 holes are the 6.5 140 load. The top ones are 30-06 180 at 100 and some 6.5 4064 loads at 50 yards.
I did not get to test my 4064 loads at 100 because the last 2 loads I made fell out of the box and got mixed up
I did shoot a 4350 load with 129 bullet and it was 2.8" group.