I Need Help on Finishing an 80% Lower

[XYZ]

Apologies for unearthing this old thread but…..

Anyone know what 80% Lowers are going for these days?

 

[Letfreedomring]

Apologies for unearthing this old thread but…..

Anyone know what 80% Lowers are going for these days?

80% Lower Receivers Archives

Checkout an extensive range of 80% lower receiver kits, made from high-quality billet & forged aluminium. Visit NOW for AR-10/AR-15 lower receivers.

daytonatactical.com

Tennessee Arms Company, LLC

tennesseearmscompany.com

 

[Old Noob]

Apologies for unearthing this old thread but…..

Anyone know what 80% Lowers are going for these days?

$40 to $80.

Search results

www.righttobear.com

 

[XYZ]

Any of you guys made one of the metal ones?
Is it tough to remove the excess?

 

[Letfreedomring]

Any of you guys made one of the metal ones?
Is it tough to remove the excess?

They usually come 7075 and drill press side loads are a non starter. One of these:

RIDGID 5.5 Amp Compact Fixed-Base Corded Router R24012 - The Home Depot

The RIDGID 1-1/2 HP Compact Router features a soft start for gradual startup and extended motor life. With its variable speeds, you can easily adjust the router to your specific material type and application.

www.homedepot.com

and a three flute 1/4" end mill are your friend.
The polymer ones are gravy...or so I've heard...

 

[Profreedomokie]

Here

is one I finished. I didn't have a jig. I just measured a factory made I had and milled it out.

 

[Spider27monkey]

If anyone is needing jigs give me a week heads up, I will beat about any price you can find…

I know your post is from two years ago. Are you still producing jigs? I acquired an aluminum ar 15 lower yesterday that needs to be milled.
First one for me, so OSA is my go to

Thanks!