My new ar

[n423]

Looks nice and performs good also.

 

[chazroh]

Put a fat boy tactical trigger in tonight, off to reload to shoot some Saturday.

 

[Mr.357Sig]

Was able to squeeze a few founds in yesterday. I need to get a fatboy tactical trigger for this one, the factory trigger is bad.
[Broken External Image]

Sweet group. Looking forward to your FBT trigger report. FBT is on my short list as I complete my first AR.

What glass is she sporting?

Sent from my iPhone using Tapatalk

 

[chazroh]

Right now just a cheap Nikon p223, planning on getting something better.

 

[chazroh]

Working on some loads, should have stopped at 3 shots!

[Broken External Image]

 

[chazroh]

Shot a few more today, the fat boy tactical trigger helped quite a bit, plus had some hand loads to test.
[Broken External Image]

 

[HansTheHobbit]

Sub MOA with a mil spec trigger? Can't beat that. With a few tweaks you should be looking at half MOA easy.

 

[YukonGlocker]

Very nice.

 

[chazroh]

It now has a 3lb trigger in it. Here's my dumb question, I've always measured outside of farthest holes then deducted the bullet diameter from that to get center to center distance. Is that correct or should you just measure outside dimensions?
According to those parameters I had two groups about.401 and I don't remember the others.

 

[tRidiot]

It now has a 3lb trigger in it. Here's my dumb question, I've always measured outside of farthest holes then deducted the bullet diameter from that to get center to center distance. Is that correct or should you just measure outside dimensions?
According to those parameters I had two groups about.401 and I don't remember the others.

That would be equivalent to measuring center-to-center without any adjustment - which is how I always assumed it was done.