I gotta say these Anderson AR lowers just like Virginia Slim have come a long way baby at least in price not as much in quality. I have two no logo Anderson lowers and probably wouldn't ever buy another Anderson anything , Both of the ones I built are slightly out of spec in the take down pin holes and are so tight you have to tap the pins through the upper with a mallet . I will say this though there is ZERO wobble between upper and lower so you don't ever have to worry about that. They were bought to build beater guns with that I don't care about if they get scratched up and abused so they serve the purpose but still unless you get them smoking cheap I would just assume save the money and get a better quality cheaper upper like an Aero which will at least be in spec.
Meh, I've built 6-10 anderson and not had any problems
I bet FBT built thousands and i did see 1 there that they had a problem with.
I bet FBT built thousands and i did see 1 there that they had a problem with.
- Joined
- May 14, 2020
- Messages
- 8,720
- Reaction score
- 27,748
I've never had an issue with the handful of Anderson lowers I've assembled. My FFL sells them for $50 out-the-door if I want one. Easier than ordering online.
I tend to worry more about barrel quality and bolt face for accuracy. YMMV…..
eta: the most expensive lower I ever built was the most ‘marginal’ spec I ever ran into. Still own it, mostly because it cost so much in correction parts to get running.
eta: the most expensive lower I ever built was the most ‘marginal’ spec I ever ran into. Still own it, mostly because it cost so much in correction parts to get running.
I never said anything about accuracy didn't see anyone else mention it either , but I did say they were both out of spec. More than I would like them to be , but the upper has no slop either which isn't necessarily good given that I have to pop the pins out with a mallet . I wouldn't ever worry about putting good quality parts in an out of spec lower though or mating a high quality upper to a cheap lower either . No sense in trying to turn a sows ear into a silk purse. These are guns which get scuffed up letting it ride around in a truck , canoe or loaning it to a family member who wants to go pig hunting .I tend to worry more about barrel quality and bolt face for accuracy. YMMV…..
eta: the most expensive lower I ever built was the most ‘marginal’ spec I ever ran into. Still own it, mostly because it cost so much in correction parts to get running.
I have Colts , an LMT or two and several FN's when I need a good quality AR. OTOH if you want a better than PSA quality upper that won't break the bank look into a BKF upper they actually have good QC and their uppers are worth the price if you're looking for a budget part.
Calm down.
Nobody called you out Karen.
Nobody called you out Karen.
