Want To Buy Reloading items needed - TRADES ADDED

[MilitantBEEMER]

So going to jump into the reloading game and need help with the press and accessories.

If you have a good new or used single stage lying around, let me know. I would like RCBS or even a Lee setup with the powder drop, scales and 380 and or 9mm and or 45acp dies, please let me know. A Lyman or Hornady reloading manual would be great as well.

I am hoping to trade for this using either factory ammo or possibly even a firearm for the right deal.

Let me know what you have an what you value it at.

Thank you

 

[MilitantBEEMER]

Found a press, powder drop, powder scale, primers, primer ram and 9mm and 45acp dies.
Still Need Following Items:

- dies in 380 and 223
- media cleaning device

Trying to do this by trading. I have factory brass cased ammo in 9mm, 556 as well as 22lr and 45acp.

 

[mouthpiece]

They have walnut media at Jerry's really cheap or go to pet store and get Lizard walnut bedding. Big bag for $15. It's cheaper per lb than the jug for $20 at Bass pro i think
I have .380 brass available for purchase.
What other brass do you need?

 

[MilitantBEEMER]

They have walnut media at Jerry's really cheap or go to pet store and get Lizard walnut bedding. Big bag for $15. It's cheaper per lb than the jug for $20 at Bass pro i think
I have .380 brass available for purchase.
What other brass do you need?

Good to know about the media. I have 9mm brass so that is where I will initially put my focus. Once I can get my hands on the 380 dies then I will for sure need the brass. Feel free to PM me pricing. Thank you

 

[swampratt]

How handy are you MilitantBEEMER?

Can you build a wooden box?
Have a drill and a hacksaw and wood saw?
You could build a pin tumbler for under 40 bucks and make the pins from scrap copper wire if you have that laying around.

Just saying.
I think I have 3 bucks in my tumbler I built years ago.
Most of the stuff was scrap people tossed out.
I had to buy a roll of duct tape $3

 

[dlbleak]

I’ve got a hodgepodge of 45 dies. I can put a set together and send them to you. Pm your address and I’ll box em up.

 

[MilitantBEEMER]

How handy are you MilitantBEEMER?

Can you build a wooden box?
Have a drill and a hacksaw and wood saw?
You could build a pin tumbler for under 40 bucks and make the pins from scrap copper wire if you have that laying around.

Just saying.
I think I have 3 bucks in my tumbler I built years ago.
Most of the stuff was scrap people tossed out.
I had to buy a roll of duct tape $3

Good suggestion. I will however probably go with a standard store bought system

 

[MilitantBEEMER]

I’ve got a hodgepodge of 45 dies. I can put a set together and send them to you. Pm your address and I’ll box em up.

WOW thank you. PM inbound

 

[tyromeo55]

Gardners might be a place to go looking for a used book

 

[ssgrock3]

Gardners might be a place to go looking for a used book

if you don't need the latest version of the quality reloading manuals like Speers, you can get a generation or two back and they are cheap. I have a Speers 14 that I got for a few bucks on ebay. It has everything I load for and then some.