- Joined
- May 27, 2009
- Messages
- 440
- Reaction score
- 21
Looking for a good gunsmith around OKC. The shotgun won’t cycle and sometimes has light primer strikes. Already changed the oring.
Agree with the above! I put mine back together after replacing the O-ring and got one of the other parts in backwards...was no bueno.
Guys, the shotgun was NIB. It was a Christmas present last year. Tore down and deep cleaned and lubed. Out of the box was immediately short stroking. Tore down again with a thorough deep clean and lube. Yes the piston is oriented correctly. It will not even cycle 1 round. As stated earlier, I feel I need a smith to look at it and don’t feel like driving to Tulsa or mailing a brand new firearm back to the manufacturer.
Tried low brass and high brass loads. The chamber is a 2 3/4”. Ran a box of low brass as single shot. Gave up and got some high brass. Same thing. With about every 5th round as a fail to fire.I know it’s a different animal but I had a similar experience with my daughters CZ right out of the box. It wouldn’t shoot lighter type loads like gun clubs reliably. I ran bout 100 heavier hotter loads through it and it’ll run light loads flawlessly now.
What shells are you feeding yours?
Enter your email address to join: