Ruger 10/22

[mr ed]

Just remember if your looking at a factory threaded barrel. The idiots at ruger threaded a lot of them 1/2 x 28x 3/4 or 1 inch instead of the industry standard of 1/2inch long and if you chuck it in a lathe and trim you're under 16" so you have to buy some stupid ruger jamnut which can throw you off and have a baffle strike.

 

[08H3]

Just remember if your looking at a factory threaded barrel. The idiots at ruger threaded a lot of them 1/2 x 28x 3/4 or 1 inch instead of the industry standard of 1/2inch long and if you chuck it in a lathe and trim you're under 16" so you have to buy some stupid ruger jamnut which can throw you off and have a baffle strike.

Hmm never seen one of those myself before.

 

[Oklahomabassin]

This could be a cheap fix for you..I had one with some play and feeding problems, added this (with the high tension spring) and problem solved.
I ended up buying and installing a couple more.
https://www.kiddinnovativedesign.com/KIDD-Magazine-Latch-Plunger-Stainless-Steel_p_136.html

Thank you!
Just to update on this. It seemed to have worked. I have only shot 50 rounds since swapping the spring. Flawless so far.

 

[Beau B]

Thank you!
Just to update on this. It seemed to have worked. I have only shot 50 rounds since swapping the spring. Flawless so far.

Nice! Glad to hear it.