timney trigger problem

[abbazabba73]

hey all, ive got a pof ar with a timney trigger, got it used, the problem is that it double taps every time i fire it. there are small allen head screws inside the assembly which looks like adjustment scews. im sure the sear/hammer engagement is minimal and causing this problem but does anyone know if its adjustable and how ? im savvy with 1911 triggers but not so with ars yet. thanks for any help. Arvid

 

[oneof79]

http://www.timneytriggers.com/index.php?option=com_moofaq&view=categories&id=2&Itemid=3

 

[BigDiezel]

There should be four allen screws, there are two under the ones you can already see. Pull the top ones out and tighten the bottom 2 with your trigger and hammer pins installed in the lower. Re-install the 2 you pulled out. Its kind of tricky to do with the springs in the way but just pull on it and place to the side to tighten the allen head screws.

 

[abbazabba73]

thanks man!!