dryfiring

[enuf]

ChamberMade Chamber Ironing Swage

Shop for ChamberMade Chamber Ironing Swage - a must-have in gunsmithing tools. Get precise results every time with this reliable tool. Made for .22lr, .22long, .22short

tandemkross.com

This is a good idea of a tool. I am certain the refacing seat on the tool is flat, but it the picture it does not look flat. Does anyone have one of these that can confirm - I would figure it'd need to be flat and true.

 

[Catt57]

ChamberMade Chamber Ironing Swage

Shop for ChamberMade Chamber Ironing Swage - a must-have in gunsmithing tools. Get precise results every time with this reliable tool. Made for .22lr, .22long, .22short

tandemkross.com

So, is that just a fancy tapered punch?

 

[red442joe]

Pretty much.
It has a slight taper that fits a 22 LR chamber.
There is a flat on the taper, with smooth rounded edges.
In use, you just ease it into the chamber with the ding (in the chamber wall, not rim face) in the flat spot.
A little back and forth twisting lets the corners of the flat spot push the raised spot back where it came from.
It really is easy, and work quite well.
I have fixed some seriously fooked chambers!

Joe

 

[enuf]

I'd think it would have to have some kind of cutting or filing surface - no?