First 10!

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mats

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Jun 8, 2022
Messages
105
Reaction score
213
Location
Norman
Here it is gang, my first 10 reloads in 7.62x54r. These ones are just to test the 123gr bullets I found locally. I'll be loading more once the 174gr bullets I ordered come in. I'm excited to try them out!
20221205_163851.jpg
 
Last edited by a moderator:

Mats

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Jun 8, 2022
Messages
105
Reaction score
213
Location
Norman

Mats

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Jun 8, 2022
Messages
105
Reaction score
213
Location
Norman
Very nice!
Thank you! I've been reading the intro sections in the manuals and watching too many reloading videos to count. Hopefully it all pays off at the range.

I think I'll be excited by the results considering the difference in headspace between factory and my fired casings was .035.
 

rockchalk06

ʞlɒʜƆʞɔoЯ
Supporting Member
Special Hen Supporter
Joined
Apr 22, 2016
Messages
4,975
Reaction score
10,099
Location
Edmond
Thank you! I've been reading the intro sections in the manuals and watching too many reloading videos to count. Hopefully it all pays off at the range.

I think I'll be excited by the results considering the difference in headspace between factory and my fired casings was .035.
I think just the consistency of your loading compared to factory surplus ammo, should result in better groups and numbers.

I've never spent more than 30 seconds with 54r, but how close to '06 is it?
 

Mats

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Jun 8, 2022
Messages
105
Reaction score
213
Location
Norman
I think just the consistency of your loading compared to factory surplus ammo, should result in better groups and numbers.

I've never spent more than 30 seconds with 54r, but how close to '06 is it?
A bit less power than '06. With max loads at the same bullet weight, the charts show roughly 200-300 less FPS. I don't have any personal experience with '06 though, so I don't know how much difference those 300 FPS really make.
 

HoLeChit

Here for Frens
Special Hen
Joined
Sep 26, 2014
Messages
6,532
Reaction score
10,505
Location
None

174gr Hornady round nose. They were listed in the Lyman manual so I thought I'd give them a shot. I also slugged my mosin bore at .313, so they should do pretty well being .312.
Ah dang, Im hoping to find some .310 bullets. I was thinking that the x54r was the same diameter.

I have a box of remington clean bore bronze tipped x54r laying around that I have no use for, Brass case I am pretty sure. Could be yours for $15?
 

magna19

Sharpshooter
Special Hen
Joined
Aug 20, 2012
Messages
1,883
Reaction score
1,652
Location
Guthrie
Here it is gang, my first 10 reloads in 7.62x54r. These ones are just to test the 123gr bullets I found locally. I'll be loading more once the 174gr bullets I ordered come in. I'm excited to try them out!
Im not very familiar with the cartridge or the guns that use it. But what is the crease just below the shoulder from. Actually looks like right on the shoulder. Brass may not last long like that. Just curious
 

Latest posts

Top Bottom