Metal Rimfire Targets

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Feb 2, 2014
Messages
9,569
Reaction score
12,028
Location
Noneubusiness
I have one of the resetting targets similar to this one made for rimfire .22 cal:
GetFile.aspx


The instructions say Minimum target distance for shooters and spectators is 25 yards. They mean it!
22LR from pistol or rifle will come back at you near that distance. I would for sure use something with a down angle.

We have a couple of these. They are fun to shoot at. And I too would suggest to follow the instructions.
 
Joined
Oct 10, 2009
Messages
850
Reaction score
781
Location
Broken Arrow
+1 on the Duraseal targets made by Champion, I shoot .22lr, but the targets are rated at .17 and above. I have a Zombie green spinner and a black prairie dog target ( had a orange prairie dog, I got thru CCI on a promotional deal, shot too many times at the center, tore the material where it spins). The price was less than $20 for each target, I believe CCI target was less than $2 when you bought 3 boxes of ammunition:
http://www.championtarget.com/targets/interactive/duraseal.aspx
Sports World in Tulsa has some metal spinning targets (to the left as you enter) Kind of pricey, I bought mine when they were on sale ( Regular price $29.99 -- I think I paid $19.99). I have the .22lr spinner and the handgun spinner 9MM thru .44 magnum -- The instructions read no closer than 25 yards, pretty challenging with my Ruger LCR .22lr, have real good luck with my Browning 1911,.22. Not a very hard shot with my S&W model 41 (Aim Small, Miss Small!)
 
Joined
Dec 9, 2008
Messages
87,928
Reaction score
70,786
Location
Ponca City Ok
You might consider the duraseal type soft spinners until you can pick up/build some abrasion resistant targets

The duraseal targets are worthless. Somebody brought one of the swingers out to the range, and a .45/.40/9 only makes it wiggle. It won't swing.

The steel in my pics is for pistol rounds only in competition. Some jerk decided to check out his .223.

Here is a little info from MGM. Steel target builders that are sponsors of 3Gun Nation as well as supplying steel targets to ranges all over the world for USPSA/IPSC and other shooting disciplines I've not listed.

"How close can I shoot steel?

MGM strongly discourages shooting ANY steel closer than 15 yards. Period. Shooters AND spectators (especially children) should always wear ear AND eye protection, regardless of target composition (steel or paper). Any closer than 15 yards presents a significant risk of the shooter or spectators being hit by bullet fragments. Generally speaking, MGM targets will easily handle hits from any traditional defense caliber handgun without significant marking.



Regarding bullet fragments hitting shooters and/or onlookers, ANYTIME you are shooting steel, this is a possibility. I don't know anybody who has shot steel, that hasn't been hit by a fragment hard enough for it to draw blood. It is usually so insignificant that it doesn't even require a BAND-AID®, but I suppose that it could be much worse.



The MAIN reason bullet fragments hit people is because the surface of the target is damaged. Damage is usually the result of 1) the target was shot with a rifle (or shotgun slug, or .44 Mag -or larger-), or 2) the steel was too soft to be a satisfactory target, in which case, traditional pistol rounds could have damaged it, or 3) any combination of the above. If the target face is smooth, bullets hit it and splatter like an egg thrown against a wall. If it is dimpled or cratered, bullets hit it and ricochet out of the craters in any direction. I personally know of bullet fragments from a high powered rifle that flew back over 200 yards, to then hit the wall behind the shooter. (That was NOT an MGM target!!) Damaged steel should not be used, even with extreme caution, regardless of the distance the shooter is from the target."
 

Latest posts

Top Bottom