Questions for .223 reloaders

[dennishoddy]

I have one of the Lee Trimmers that has never been used that I need to part with. I've built my own pneumatically controlled trimmer for volume trimming of any caliber wanted.
As far as the RCBS swager, I found it to be inefficient for volume loading and chose the Hornady system to cut the military crimp. Much faster.

 

[Fyrtwuck]

I use the Dillon swager. It takes a little trial and error to get it just right, but I’ve had good results.

 

[magna19]

Used the rcbs swager no problems. Setup is the key. Is a little tiresome on big batches of brass. A heavy solid bench is also key in mass swaging.

 

[Defcon Shooter]

I use a Lyman reamer chucked up in a cordless drill. Quick spin and crimp is gone

 

[Dumpstick]

I use the C&H swager. Much easier than the RCBS, once it's set up correctly.

I've also used a reamer in the drill press for 9mm. Quick touch, it's done.

I can do probably 15 - 20 a minute that way.