Reloading 38Spl w/ W231 - dipper vs auto trickler vs Uniflow III

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Wheelgun

Sharpshooter
Special Hen
Joined
Jan 21, 2020
Messages
133
Reaction score
133
Location
Oklahoma
I have the Lee auto-drum powder measure. With fine powder like W231/HP-38 it is very very consistent.
It’s not terribly expensive either.

It screws into the top of the Lee expanding die or a charge die and dumps power as the case is being expanded. Very slick, convenient and consistent.

 

aabokla

Sharpshooter
Special Hen
Joined
Oct 2, 2005
Messages
113
Reaction score
19
Location
Tulsa, OK
UPDATE: I thought I had my powder woes defeated and had developed a consistent dance with the dispenser...I really thought I did, but apparently I didn't. Out of my latest 50 rounds the first 15ish were spot on but the last 35 drifted from +.2 grains to most being under .3 grains, which put my charge at 3.7 which is below the specified minimum.

I am 100% convinced it's me and my technique.

With that said....I went and bought a Lyman Gen6 powder dispenser and couldn't be happier! Just loaded 50 and it's comforting to know what the charge is. Out of the dozen or so I compare weighed not one was over or under charged. It's just too easy.

Thanks again for all of the great advice!
 

Latest posts

Top Bottom