Just a "share what you got" or what you like in rimfire rifles thread.
Right now, my favorites are:
-- CZ 452 Scout 'Youth' .22lr, turnbolt, with a slip-on recoil pad to lengthen the LOP, with Trijicon Accupoint 1.25-4x24mm forward mounted. 16", 1 in 16. Handy dandy light little dude! However, I need a better mounting solution for the Accupoint besides the current "two-adjacent-standard-rings-both-forward-of-the-turret-and-on-the-front-part-of-the-integral-rifle-dovetail" setup. It sticks out unsupported too far forward and doesn't seem sturdy enough, though it does seem to work fine. Ideas?
-- Atchisson-Ceiner .22lr conversion kit, semi-auto, with a DMPS M4 type rifle dedicated completely to the conversion. Sig 522 mag. Tacticooled up, with an NC Star 3-9x42mm "semi-FACOG" & laser. 16", 1 in 9
-- Izhmash Biathlon Basic .22lr, toggle bolt, with Sightron SII 4.5-14x42mm AO
-- Savage 24f, with the top bbl in .22lr (bottom one is 20 ga), single shot break action, 24" bbl. This one has no scope right now, but I'm thinking of putting back on it the one I had on it before - a Bushnell Banner 1.0-4x32mm with circle-X. I'm also at some point definitely going to have a 'smith shorten the whole shebang to 18.25". Anyone know a good smith for this project? Rabbit/squirrel gun.
-- CZ 453 Varmint .17 HMR, turnbolt, w/Bushnell Elite 4200 6-24x40mm AO, 20.5" bbl. Probably the funnest gun I have, and a great "noob inductor" rifle.
I used to have a lot more (few more anyway), but got rid of them - not enough time to shoot them all. Still determined to pick up a Browning BL-22 when I find a decent deal on one. I would also like to get an Anschutz someday. Also need to get a new .22 mag, since I parted with the others. Probably will go CZ 452 Varmint or 453 Varmint for the .22 mag.
Hollar if you want me to post pics.
Right now, my favorites are:
-- CZ 452 Scout 'Youth' .22lr, turnbolt, with a slip-on recoil pad to lengthen the LOP, with Trijicon Accupoint 1.25-4x24mm forward mounted. 16", 1 in 16. Handy dandy light little dude! However, I need a better mounting solution for the Accupoint besides the current "two-adjacent-standard-rings-both-forward-of-the-turret-and-on-the-front-part-of-the-integral-rifle-dovetail" setup. It sticks out unsupported too far forward and doesn't seem sturdy enough, though it does seem to work fine. Ideas?
-- Atchisson-Ceiner .22lr conversion kit, semi-auto, with a DMPS M4 type rifle dedicated completely to the conversion. Sig 522 mag. Tacticooled up, with an NC Star 3-9x42mm "semi-FACOG" & laser. 16", 1 in 9
-- Izhmash Biathlon Basic .22lr, toggle bolt, with Sightron SII 4.5-14x42mm AO
-- Savage 24f, with the top bbl in .22lr (bottom one is 20 ga), single shot break action, 24" bbl. This one has no scope right now, but I'm thinking of putting back on it the one I had on it before - a Bushnell Banner 1.0-4x32mm with circle-X. I'm also at some point definitely going to have a 'smith shorten the whole shebang to 18.25". Anyone know a good smith for this project? Rabbit/squirrel gun.
-- CZ 453 Varmint .17 HMR, turnbolt, w/Bushnell Elite 4200 6-24x40mm AO, 20.5" bbl. Probably the funnest gun I have, and a great "noob inductor" rifle.
I used to have a lot more (few more anyway), but got rid of them - not enough time to shoot them all. Still determined to pick up a Browning BL-22 when I find a decent deal on one. I would also like to get an Anschutz someday. Also need to get a new .22 mag, since I parted with the others. Probably will go CZ 452 Varmint or 453 Varmint for the .22 mag.
Hollar if you want me to post pics.