North East OK WTS: Huge Sale on Reloading Components, Barnsdall ***UPDATED****

[dennishoddy]

Only an hour for me. I see some things I might need.

 

[Cold Smoke]

Only an hour for me. I see some things I might need.

...and I was just starting to like you and you had to go and say something like that. I have to ferry to a baby shower in the other direction.

 

[dennishoddy]

@kwaynem, want me to pick you up on the way?

 

[Prairie Traveler]

Going to try to make it Saturday!!!
Do you recall if you have any 209 primers?

 

[Forgalspop]

https://www.okshooters.com/attachments/bullets-jpg.260988/
Eye Candy!

 

[TonyRumore]

Going to try to make it Saturday!!!
Do you recall if you have any 209 primers?

There are no shotgun primers or 50BMG primers.

I'll post up more close up pics and detailed descriptions of the items on Thursday.

Tony

 

[Georgie 1]

Getting up in age, I've decided to thin out my reloading stash and will be selling a pile of bullets, primers, powder and brass in Barnsdall Oklahoma this coming weekend.

About 75 pounds of powder - VihtaVuori, Winchester, Hodgden, and Accurate Arms.

Over 600 boxes of jacketed commercial bullets - 22, 6mm, 6.5mm, 6.8/270, 7mm, .308, 9mm, 40/10mm, 41, and 45 calibers from Nosler, Speer, Hornady, Sierra, Lapua, Berger, etc. Also some cast pistol bullets in 9mm, 10mm, and 45 ACP and a few bags of lead shot.

Tens of thousands of pieces of brass - 17 Fireball, 204 Ruger, 22 Hornet, 221 Fireball, 222 Remington, 222 Rem Magnum, 5.56, 6mm AR, 6x45, 6x47, 243, 250 Savage, 22-250, 6mm BR, 270 WSM, 7mm TCU, 7mm BR, 7mm-08, 6mm Creedmoor, 6.5 Creedmoor, 6.5 Grendel, 6.8 SPC, 280, 9mm, 357 Sig, 40 SW, 10mm, 357 Mag, 38 Special, 38 Super, 41 Magnum, 41 Avenger, 45 Winchester Magnum, 45 Long Colt, 45 ACP, and much more I can't remember off the top of my head. Manufacturers are Hornady, Nosler, Starline, Remington, Winchester, Lapua, Norma, etc.

About 30,000 primers - Winchester, Federal, CCI, and Remington. Both standard and Match/Benchrest. $80-$90 per 1,000.

Also have a small amount of factory ammo in 45 ACP and 6.5 Grendel.

As for pricing, I pulled most of it from Midway USA and marked it 20% down from there, even if the item was discontinued many years ago. Except for the primers...or the first guy in, would just buy them all, mark them up, and resell them to you.

I don't have any credit card equipment set up in this location, so please bring cash.

The building will be open Saturday and Sunday March 26th and 27th, 9am to 5pm.

401 W. Main Street, Barnsdall Oklahoma.

This is a one-time, two day sale only.

Tony Rumore

P.S. There will be no guns for sale, only reloading components.

What shotgun powder do you have?

 

[Chaparral]

Hate to sound like a vulture, were you thinking of selling books or equipment or tools as well?

BTW thank you for doing this!

 

[TonyRumore]

There won't be any of that at this particular sale. But we will most likely have another one with reloading equipment, dies, manuals, etc.
We're in the process of moving the shop from Inola to Barnsdall, so now is good time to dust off 30 years of stuff that's been collecting dust and move it to someone that can use it. We also have PILES of Tromix blemished AR parts, barrels, bolts, receivers, etc for .458 SOCOM, 450 Bushmaster, 50 Beowulf etc. Also AK and Saiga stuff from years back. And of course three-quarter built failed prototypes......I made a lot of stuff that didn't work unfortunately.....but could be reconfigured and made to work or just parted out. It's just way too much stuff to take to a gun show and there isn't enough room at our Inola place to lay it all out. We have plenty of room in Barnsdall. 8,000 square feet.

Tony Rumore
Tromix

 

[Cat City Slim]

Do you happen to know if you have any 300 Savage brass?