Dang nice!
Yes I have
Picture one is buffing bullet wheels with fritz polish, extra bullet buffers and a McCarbo CZ P07 Trigger kit. My trigger is pretty good in both SA and DA but this will be fun to do.
Next picture is a nickel plating set up I got on line with everything I need. I also ordered additional copper and nickel pieces. I'm hoping one of you folks can tell me it the trigger on my CZ P07 is polymer or metal. I need to know asap. If I don't know, I'll put the trigger under a grinder and see if it gets to some shiny stuff (metal) so I can nickel plate. My upper slide I sent off to get it milled for the Holosun 507K red dot (you will see after this) that I'm having finished in brushed nickel and will match.
You CZ guys give me some help
I love these optics. Never had the K series but wanted it so it fits perfectly on the slide. 2 dot, circle or circle with red dot with easy adjustments for zero and brightness Is also Shake to wake but no solar strip on top. Solar strip, not having the option for red or green dot and a bit smaller.
OK guys and gals.....Is the trigger polymer or metal? I need to know because it will be put under the wheel. As they used to say, bust a deal face the wheel. Ha. Most won't get that.
Let know though if you know
Picture one is buffing bullet wheels with fritz polish, extra bullet buffers and a McCarbo CZ P07 Trigger kit. My trigger is pretty good in both SA and DA but this will be fun to do.
Next picture is a nickel plating set up I got on line with everything I need. I also ordered additional copper and nickel pieces. I'm hoping one of you folks can tell me it the trigger on my CZ P07 is polymer or metal. I need to know asap. If I don't know, I'll put the trigger under a grinder and see if it gets to some shiny stuff (metal) so I can nickel plate. My upper slide I sent off to get it milled for the Holosun 507K red dot (you will see after this) that I'm having finished in brushed nickel and will match.
You CZ guys give me some help
I love these optics. Never had the K series but wanted it so it fits perfectly on the slide. 2 dot, circle or circle with red dot with easy adjustments for zero and brightness Is also Shake to wake but no solar strip on top. Solar strip, not having the option for red or green dot and a bit smaller.
OK guys and gals.....Is the trigger polymer or metal? I need to know because it will be put under the wheel. As they used to say, bust a deal face the wheel. Ha. Most won't get that.
Let know though if you know
Attachments
It should be stamped steel.
Did you try a magnet? If it doesn't stick, it won't necessarily prove it's not metal, but if it does stick it will necessarily prove it's not polymer.
If you read far enough down in this article...
www.everydaymarksman.co
You'll find this statement...
"I did my homework ahead of time and already knew that it takes a few hundred rounds to “wear in” the stamped steel components of the CZ trigger. The one I rented at the range has thousands and thousands of rounds on it."
This was in a section labeled "CZ P-07 Trigger". So a magnet should stick to it, if that's correct.
Did you try a magnet? If it doesn't stick, it won't necessarily prove it's not metal, but if it does stick it will necessarily prove it's not polymer.
If you read far enough down in this article...
CZ P07 Review: The DA/SA Glock Replacement? - Everyday Marksman
After a year of use, including range time and carry, I thought it's time to review my almost daily companion, the CZ P07 pistol. If you're in the market for a DA/SA polymer 9mm, then it's definitely worth considering. But know what you're getting yourself into first. Let's talk.
www.everydaymarksman.co
You'll find this statement...
"I did my homework ahead of time and already knew that it takes a few hundred rounds to “wear in” the stamped steel components of the CZ trigger. The one I rented at the range has thousands and thousands of rounds on it."
This was in a section labeled "CZ P-07 Trigger". So a magnet should stick to it, if that's correct.
Thanks but I've had mine for a very long time and with it I have the Shadow 2. Magnet is brilliant and apparently I'm not ha. Had it for some time and wanted to dress it up a bit starting with milling the upper for a red dot. That led to refinishing the entire slide in brushed nickel. Since this is my preferred carry gun, even more so that the shadow, kimber or FNX 45, I just wanted to upgrade. I can shoot lights out with this gun and feel if may be the most under rated gun in the 9mm market..It should be stamped steel.
Did you try a magnet? If it doesn't stick, it won't necessarily prove it's not metal, but if it does stick it will necessarily prove it's not polymer.
If you read far enough down in this article...
CZ P07 Review: The DA/SA Glock Replacement? - Everyday Marksman
After a year of use, including range time and carry, I thought it's time to review my almost daily companion, the CZ P07 pistol. If you're in the market for a DA/SA polymer 9mm, then it's definitely worth considering. But know what you're getting yourself into first. Let's talk.
You'll find this statement...
"I did my homework ahead of time and already knew that it takes a few hundred rounds to “wear in” the stamped steel components of the CZ trigger. The one I rented at the range has thousands and thousands of rounds on it."
This was in a section labeled "CZ P-07 Trigger". So a magnet should stick to it, if that's correct.
I had intended to smooth out a few places but then, what the heck, get a spring kit from M Carbo, sand down and polish down to a (Wow. Never thought I could get it so smooth) reaction.
Checking the magnet now... Crossing my fingers
The Holosun 507k-gr I ordered showed up today. I'm going to see if it'll run on my Kel-Tec PMR-30. Nicely built. I like the circle dot reticle. The green is easy to pick up. Now, where is that bleeping blue Loctite?
The screws should already have some applied (as long as you dont cut them!)
They do! How convenient!
Another set of Culina K/L frame round butt combats, this time from Koa wood. Their new home is a model 64-6:
I just had to buy a new tube over the weekend. It required a supervisors approval at the register as it is a restricted item. Why in the world is loctithe a restricted item?
Wow. Those are sexy.Another set of Culina K/L frame round butt combats, this time from Koa wood. Their new home is a model 64-6:
Similar threads
- Sub Category: Handguns
- Sale Price: 650$
- Caliber: .45/ 9mm
