Firing pin

[HogHQ39]

I will be replacing my firing pin for my 7.62x39 upper for an enhanced firing pin. Will I need to adjust the scope after installing a new firing pin or will that hinder accuracy at all? Thanks

 

[L.C.]

I will be replacing my firing pin for my 7.62x39 upper for an enhanced firing pin. Will I need to adjust the scope after installing a new firing pin or will that hinder accuracy at all? Thanks

Nope

 

[Cowcatcher]

You’ll probably need atleast a 20 Moa base to get your zero back with the new firing pin.

 

[mouthpiece]

You’ll probably need atleast a 20 Moa base to get your zero back with the new firing pin.

Stop that. No you'll be fine. I suggest REDXArms

 

[HogHQ39]

Nope

Thank you

 

[HogHQ39]

Stop that. No you'll be fine. I suggest REDXArms

I got the Black Rifle Arms enhanced firing pin

 

[mouthpiece]

I got the Black Rifle Arms enhanced firing pin

I'm not familiar With them but I haven't kept up with the 7.62x39 market for some Time now.
I did take a standard firing pin and turn off a few thou from the shoulder to allow deeper penetration.
So there is that option also.
Let us know how it works. Were you getting failures to fire previously?

 

[HogHQ39]

I'm not familiar With them but I haven't kept up with the 7.62x39 market for some Time now.
I did take a standard firing pin and turn off a few thou from the shoulder to allow deeper penetration.
So there is that option also.
Let us know how it works. Were you getting failures to fire previously?

Yes, every 6-8 shots it would not fire. I’m shooting the steel cased ammo so the primers are a bit tougher. I do a lot of night hunting for pigs and had to switch to 7.62x39 for ammo. Got the firing pin switched so we’ll see how she goes