Official: OSA NFA Timeline Thread

[El Pablo]

Did a quick search and found this, https://www.silencershop.com/blog/post/cleaning-a-suppressor they should know. I intentionally bought an all titanium rimfire suppressor so I could drop the tube and about everything in. Guess I should buy a ultrasonic cleaner now and test it out. .22 lr is so freaking dirty.

 

[dennishoddy]

Did a quick search and found this, https://www.silencershop.com/blog/post/cleaning-a-suppressor they should know. I intentionally bought an all titanium rimfire suppressor so I could drop the tube and about everything in. Guess I should buy a ultrasonic cleaner now and test it out. .22 lr is so freaking dirty.

Yes it is. Did they give a solution to use with the simple green like 4 : 1 or something like that?

 

[dennishoddy]

Did a quick search and found this, https://www.silencershop.com/blog/post/cleaning-a-suppressor they should know. I intentionally bought an all titanium rimfire suppressor so I could drop the tube and about everything in. Guess I should buy a ultrasonic cleaner now and test it out. .22 lr is so freaking dirty.

This in the link.

• Aluminum: Aluminum is incredibly lightweight and can be very durable in certain applications, but aluminum does not have the same strength of steel and can be susceptible to damage if improperly maintained. Using harsh suppressor cleaner solvents, ultrasonic cleaners, or abrasive tumblers can cause erosion and pitting which is detrimental to the aluminum baffles.

 

[El Pablo]

This in the link.

• Aluminum: Aluminum is incredibly lightweight and can be very durable in certain applications, but aluminum does not have the same strength of steel and can be susceptible to damage if improperly maintained. Using harsh suppressor cleaner solvents, ultrasonic cleaners, or abrasive tumblers can cause erosion and pitting which is detrimental to the aluminum baffles.

Yep, my 22 cans aren’t for that very reason. think one may have an aluminum tube.

 

[Harp13]

Did a quick search and found this, https://www.silencershop.com/blog/post/cleaning-a-suppressor they should know. I intentionally bought an all titanium rimfire suppressor so I could drop the tube and about everything in. Guess I should buy a ultrasonic cleaner now and test it out. .22 lr is so freaking dirty.

Mine was so dirty the baffles would not stack.

Used CLR in a plastic container for 5 minutes and rinsed well the first time. That worked great, but I do not think it is good for the SS baffles.

I have the big Hornady heated ultrasonic cleaner (will hold a 16" upper). Also have 3 of the smaller cleaning chambers so that it does not have to use as much cleaner for small items.

The 2nd cleaning was in the ultrasonic with 1:1 simple green and water at 140 degrees for 15 minutes.

 

[LittleLoggie]

Traditional NFA Trust submitted 9/26/24

Will be my first suppressor, Sparrow .22

Edit: Sooner state pawn was a big help in this process. Definitely recommend using them.

 

[LittleLoggie]

Traditional NFA Trust submitted 9/26/24

Will be my first suppressor, Sparrow .22

Edit: Sooner state pawn was a big help in this process. Definitely recommend using them.

Approved, 20 days!

Had me and my wife on the trust paperwork to be cleared.

 

[cobra1]

16 days

 

[beardking]

Well, time to start the timer on mine. Put a Silencerco Sparrow in jail this afternoon. I'm hoping that I'll be one of the lucky ones that get a less than a week turnaround. I'm not betting on it, but I'm hoping for a Christmas miracle.