50 rds 22-250 80.5 berger 34.5 h4350
Took me a bit, but I settled on what I thought was a good load using the SRP Lapua and Berger 140 VLD Targets over 40.9 grains of H4350. SD of 6 and right at 1/2” @100. I loaded up 50 of these and never got around to shoot them at distance. Watches, work and the heat got in the way.
My can was paroled, so I was dreading doing this all over again. Loading God's were generous to me! Grouping was the same @100. Not much if a POA shift either. I could dope it if need be. @200 was very tight under 3/4”. @300 it opened up to 1.5", but I can't tell if that was the can getting hot, the wind that picked up or not. I'll load up another 50 or so and run them out to 546.
My can was paroled, so I was dreading doing this all over again. Loading God's were generous to me! Grouping was the same @100. Not much if a POA shift either. I could dope it if need be. @200 was very tight under 3/4”. @300 it opened up to 1.5", but I can't tell if that was the can getting hot, the wind that picked up or not. I'll load up another 50 or so and run them out to 546.
Mind me asking what can you went with and if it's a bull barrel since poi didn't shift much? Thx
Can or load?
Can is a YHM Resonator 2. I swapped the QD attachment for a direct thread. Barrel is a mid weight factory Bergara 22
- Joined
- Jul 31, 2023
- Messages
- 20
- Reaction score
- 35
I cleaned out and gave away shuff I’ll never use again.
I feel for ya….single stage…..damn
Looking good. What kind of speed are you getting
