Anyone loading a 70-80gn 223 for an AR

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mouthpiece

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
May 15, 2007
Messages
5,349
Reaction score
2,542
Location
Broken Arrow
Give me some thoughts. Has to be mag length. Experiences, loads...
I have a new 1/7 barrel that won't shoot the light stuff(55/62gn) so I am thinking about loading some heavier bullets(69-77gn) for it
Or I am gonna pull it an put a different twist (1/8 or 1/9) barrel in it.
 
Last edited:

adamsredlines

Sharpshooter
Special Hen
Joined
Mar 8, 2016
Messages
7,877
Reaction score
13,648
Location
Boone, NE
My buddy loads 77s for his and it shoots lights out.
77gr SMK, 24gr Varget, 2.260 is the load he told me he uses that shoots well in all of his rifles and exceptionally in a few.
I think its a bit on the hot side but works well so take it for what its worth.
 

Shinneryfarmer

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Oct 10, 2020
Messages
2,599
Reaction score
10,707
Location
Western Oklahoma
Have a 1 in 8 18inch bull barrel I thought loved 69gr bullets. Shot them under 3/4 moa until a buddy was shooting some 77gr SMK's one day at the range with his 1in 7. I loaded 3 rds in mine and all 3 rds clover leafed at 200yds in my rifle from the bench. I shoot 77's now, 23.7gr Varget 2.260
 

sklfco

Sharpshooter
Special Hen
Joined
Sep 4, 2012
Messages
4,213
Reaction score
14,035
Location
claremore
18” 1:8 wylde chamber. Magnetospeed registers them out the end of the can at about 2650.
24.1 gr re15 loaded to just have daylight gap in my mags (don’t recall length as it’s done on a 650) 77 gr smk (no tip)
Lake city brass with the usual prep on the cases, cci 400
This is an extremely repeatable load, out past 500 it doesn’t have much steam left but in closer it really performs.
 

Louro

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Sep 26, 2014
Messages
2,468
Reaction score
2,158
Location
Lawton
My buddy loads 77s for his and it shoots lights out.
77gr SMK, 24gr Varget, 2.260 is the load he told me he uses that shoots well in all of his rifles and exceptionally in a few.
I think its a bit on the hot side but works well so take it for what its worth.

I using 77gr Hornady and I think 25 gr of varget (need to look at my notes). The key is having the right twist, I have WOA upper and it shoot lights out. I chrono that particular load and I had good velocity and accuracy.
 

MacFromOK

Sharpshooter
Special Hen
Joined
May 11, 2016
Messages
13,759
Reaction score
14,758
Location
Southern Oklahoma
I have a new 1/7 barrel that won't shoot the light stuff(55/62gn)
I have some questions if ya don't mind...

1. Why don't they work? Is it because the lighter bullets are traveling too fast for that much twist?

2. Was there a noticeable difference in accuracy between the 55 and the 62 in the 1:7 barrel?

Just curious, thanks.
:drunk2:
 

mouthpiece

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
May 15, 2007
Messages
5,349
Reaction score
2,542
Location
Broken Arrow
They functon but I don't consider basketball Size groups to work for me out of a new barrel.
I'm going to try some different weights in this barrel but I have a feeling I will ultimately pull it and go with something 1/8 or 1/9 because most(of my ammo and ammo in general) ammo is in the range that those twists shoot better on average.
 

Latest posts

Top Bottom