Crimped primer pockets..

[Hooper]

The Lyman is sharper than the lee

 

[mouthpiece]

I like the RCBS primer pocket swager.

 

[Shadowrider]

1050 Dillon reloader and just load like usual. It automatically swages the primer pockets as you load.

That's the only thing better than Dillon's super swage.

For those interested in the super swage, if you use the rubber band/spring trick you can run through a lot of brass in short order.

Like this but I run the band to a nail on a board that the swager is mounted to.

 

[Profreedomokie]

That's the only thing better than Dillon's super swage.

For those interested in the super swage, if you use the rubber band/spring trick you can run through a lot of brass in short order.

Like this but I run the band to a nail on a board that the swager is mounted to.

That is what I use.

 

[Rez Exelon]

View attachment 537467

Lyman chamfer tool.

You can take the cutter off and chuck it in a drill.
By hand it takes me about 4-5 seconds to cut a crimp with these.

A great many tools can be chucked in this bad boy and run through super-de-duper fast:

https://www.lowes.com/pd/Shop-Fox-10-5-in-x-29-in-Variable-Wood-Lathe/5015570795

 

[Rustytigwire]

Been trimming them out with this but man it gets old after a couple hundred rounds.

This also fits in a medium or small drill chuck

 

[Rustytigwire]

Dylan, if not used carefully, can make a dimple. Inside the case.. not always centered on the primer hole.
Force required to overcome crimp. Against the internal backing pin..
Difference in cartridge web thickness Will very length of stroke. Cartridge web is not always uniform and thickness

 

[Coug91]

Dillon 1050

 

[Camo]

Problem solved. I have a drill press for larger quantity runs,

 

[swampratt]

A great many tools can be chucked in this bad boy and run through super-de-duper fast:

https://www.lowes.com/pd/Shop-Fox-10-5-in-x-29-in-Variable-Wood-Lathe/5015570795

Nope!
You boys are packin' fatter wallets than I am.

I like to repurpose things.
So here is my cleaning brush holder and it will also hold chamfer tools as it has a 1/2" drill chuck head I attached to it.
What is "It"
An oscillating cooling fan motor and it is placed in a cole slaw container.

I have had many drills die and fans are always available on the FREE.
A rag over the cooling holes catchs the debris.