Shop Heat

[OKRuss]

Well, I went and checked. I had the heater seat at 50 and low range “7500watts” instead of high range “10kwatts”

Flipped the breaker and slowly the lights went out and let sit a minute.
Flipped breaker on and it reset it to 65* and high range “10kwatt”

And it came on as the shop was 60*.

So I did a second test. I flipped breaker this time with it running trying to get to the 65* it had reset at.

I reset the minimum temperature back to 50* and it went into the heat off but fan running for 3 minutes to cool off mode, as the manual said it would.

Let it sit a minute or so and flipped breaker and once again it came back on and had reset itself to 65* and on high 10kwatt once again.

TY! So it seems to have a default and DOES come back on just not where it was set when the power went off. I'll need to check ours next weekend because if it'll do something similar then no need for me to buy another heater and switch.

 

[Mr.Glock]

I wish it would reset at lower temps. I take off for a week and have a power surge and it will go to heating at 65*!!!!

 

[OKRuss]

I wish it would reset at lower temps. I take off for a week and have a power surge and it will go to heating at 65*!!!!

That's my concern as well. Have a power outage on 1/1/25 and I don't go back until sometime in March and it's been heating an empty bunkhouse for 2-3 months!

 

[Shinneryfarmer]

I wish it would reset at lower temps. I take off for a week and have a power surge and it will go to heating at 65*!!!!

I wish mine would reset that low, it defaults to 78*. My normal setting is 65* in the winter months, and if cold I burn the fireplace to warm things up.

 

[Mr.Glock]

I wish mine would reset that low, it defaults to 78*. My normal setting is 65* in the winter months, and if cold I burn the fireplace to warm things up.

This is a Vevor it sets from 45* to 99*. 10000 watt 17500 btu for a 1000sq ft.

What brand is yours? I am pretty sure I can add battery source to keep the setting at whatever I want. I May piddle with doing that soon.

I have nat gas heat that will keep shop from freezing, but it puts way to much moisture in the shop. That is why I like wood and added the electric heater.

 

[Shinneryfarmer]

This is a Vevor it sets from 45* to 99*. 10000 watt 17500 btu for a 1000sq ft.

What brand is yours? I am pretty sure I can add battery source to keep the setting at whatever I want. I May piddle with doing that soon.

I have nat gas heat that will keep shop from freezing, but it puts way to much moisture in the shop. That is why I like wood and added the electric heater.

Keebar 10000 watt, 24590 btu for 1000sq ft. Haven't thought about battery backup, that may be possible to keep digital thermostat powered in case of power outage.

 

[Tall]

Was thinking about buying 12 of these and put 1 on each side of the mounting bracket(x 6 lag bolts). What kind of 'rubber mount' did you use? https://www.amazon.com/PATIKIL-Vibration-Isolation-Mechanical-Damping/dp/B0BTHF8MQ5/ref=sr_1_12_sspa?dib=eyJ2IjoiMSJ9.mIP8LfJmJPHbn5enRGyMriUahxD4nhNYKqHF2lvR9M75P_0KcPykIal3n2WlknvvKzx5_a41z9kEdjG94rkPwKIMTjgUeNCmUvaVuDfwHR7ykSrpyYuqcZ5VBmbuy91CJqjPdIKqUIHP0mqBnSrST01s1GITQG7AQ8Sxc_wkyVAWy5UJctk-uZ5CHAmW7bpQerHn4EZq5xYFWZiBwtArTpF3UukJ_aYIE2LRbtGGxZU.x3jfyTGkA9ypbP59B8mrchPu2YdCcUCKPBREHYIyxVU&dib_tag=se&keywords=anti+vibration+3/8&qid=1734710866&s=industrial&sr=1-12-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9tdGY&th=1

I didn't go that way at all. I built a 30' by 50 ' shop and used one of these https://www.homedepot.com/p/LG-23-0...nd-Dehumidifier-in-White-LW2423HRSM/322850190

I built the shop in 2019 - 2020 and it has worked well so far.

 

[OKRuss]

That's my concern as well. Have a power outage on 1/1/25 and I don't go back until sometime in March and it's been heating an empty bunkhouse for 2-3 months!

Well, looks like ours doesn't come back on. It was on when I got there - around 54 deg(set at 50 when gone). Turned off the breaker and it went off. Waited a couple minutes then turned back on. Power light came back on but the heater was OFF - no reset to any temp.

Ours is a Comfort Zone CZ260ER which is their 10K watt model. I've got an email into their customer support for a definitive answer that I think I already know.

Watched a couple of YT videos with this model and no loud noise when they kick on/off. May honestly be bearings or something internal and just has always been that way.

 

[Mr.Glock]

Well, looks like ours doesn't come back on. It was on when I got there - around 54 deg(set at 50 when gone). Turned off the breaker and it went off. Waited a couple minutes then turned back on. Power light came back on but the heater was OFF - no reset to any temp.

Ours is a Comfort Zone CZ260ER which is their 10K watt model. I've got an email into their customer support for a definitive answer that I think I already know.

Watched a couple of YT videos with this model and no loud noise when they kick on/off. May honestly be bearings or something internal and just has always been that way.

Damn! I retested mine yesterday, as I had to shut power to shop as I had to add another 50amp welders plug at the back of the shop. So I can weld on the north side.

Anyways had the heater set at 67 as it was warm. Shut mains off and did my plug and breaker, restored power and the Vevor Heater came on and had reset itself at 50*.

Your heater old? It have a place for a 9v battery?

 

[OKRuss]

Damn! I retested mine yesterday, as I had to shut power to shop as I had to add another 50amp welders plug at the back of the shop. So I can weld on the north side.

Anyways had the heater set at 67 as it was warm. Shut mains off and did my plug and breaker, restored power and the Vevor Heater came on and had reset itself at 50*.

Your heater old? It have a place for a 9v battery?

3-4 yrs. Don't believe any 9v battery. Emailed comfort zone and waiting on reply.